Manually filling up your horse’s water dish can be extraordinarily tedious and time consuming which is why most horse owners opt for an automatic waterer. Since there’s a great deal of variety among horse waterers it can be tricky to find the one best suited for your purpose, especially if you’re looking for one made with a certain material or with heating capabilities. That’s why we’ve reviewed the best choices on the market and have narrowed your choices down to the five best based on a series of criteria, including:
- Automatic Farm Grade Horse Waterer is the best value for your money.
- Homend Automatic Horse Waterer – Best for Easy Cleaning.
- Ritchie Omni Fount 2 Automatic Horse Waterer – Best Insulation.
- Automatic Farm Grade Horse Waterer – Best Durability.
- Behlen Country AHW80 Horse Waterer – Best for Easy Setup.
- Brower MK32E Super Insulated Electric Heated Horse Waterer – Best for Heating the Water.
Our Top Overall Pick
- Homend Automatic Horse Waterer is our pick based on value, durability and utility.
|Homend Automatic Horse Waterer||Check Price|
|Ritchie Omni Fount 2 Automatic Horse Waterer||Check Price|
|Automatic Farm Grade Horse Waterer||Check Price|
|Behlen Country AHW80 Horse Waterer||Check Price|
|Brower MK32E Super Insulated Electric Heated Horse Waterer||Check Price|
Top 5 Best Automatic Horse Waterers
1. Homend Automatic Horse Waterer – Best for Easy Cleaning
- Stain, deformation, and rust-resistant
- Maintains a constant water supply of clean water
- High capacity with a diameter of 25cm
- Easy installation with 2 rear screw holes
- Fine edge finishing to avoid scratches
- Price: Check Price
This waterer serves a multi-purpose to cater to outdoor animals like sheep, horses, goats, hogs, alpaca dogs, etc. It is made up of 304 stainless steel and operates on pressures ranging between 1 to 50 psi. This pressure is the standard home water pressure. This machine can be conveniently placed at any desired height with the help of U-bolts and lag bolts but these are not given with the product. For fitting purposes, a ½ inch standard pipe can be utilized and it can be made to reverse between a right or left connection.
To maintain a constant supply of clean water a Float Switch is used. It is water efficient and saves more than 30% of the water used by animals reducing the sewage pressure while discharged. For assembling this device the male thread connects to the female thread. Metal and ½ PVC both pipes can be used while assembling. Has a ½ slip to ½ FIP adapter. The fitting pipe is called the ½ NPT (National pipe thread) or MIP (Male iron pipe). The package includes an automatic waterer of 3.59 pounds but a drainage hole is not included. The product has dimensions of 11.81 x 7.87 x 3.94 inches. It was given 4.4 stars out of 5 and was rated as the 30th best horse watering product on Amazon.
- Low maintenance
- Long-lasting and durable
- Strong body
- Does not trip
- Easy to install
- Sharp edges
- Hard to dump water
- Occasional leaks
2. Ritchie Omni Fount 2 Automatic Horse Waterer – Best for Insulation
- Easy to clean and maintain
- Easy access to waterline and heating materials
- Polyurethane foam provides amazing insulation with a 7 per inch r-factor
- Heating components are placed directly underneath the stain-proof trough for better results
- Animal safety features
- Price: Check Price
This product is a blend of old stainless steel waterers and poly waterers to bring the best of both worlds. The body is insulated to save energy and the edges are round for safety purposes. With thermostatically managed heating components under the steel trough, the product prevents frost even during the harshest of seasons. The product features one trough with a refill valve to provide freshwater for up to 40 horses and other big animals.
The machine is easy to clean with components like water lines and heating elements easy to access. Line supply protection and an extra valve are provided with the cable heater. This waterer is easy to fix with water and electric lines. The 10-year warranty is a huge security and a plus point for this product. The weight of the product is 55 pounds and has been ranked as the 54th best livestock waterer on Amazon.
- Automatic water heating
- Sturdy body
- No unwanted sizzling during heating
- Makes slight noise during operation that may scare away animals
- Certain parts require extremely careful handling
- Installation is tricky
3. Automatic Farm Grade Horse Waterer – Best for Durability
- Easy to fix
- 201 steel, stain proof
- Float is adjustable and can be connected to a garden hose
- ½ MIP water inlet can be connected to a garden hose, PVC, or a flex pipe
- Automatic cattle waterer
- Price: Check Price
This water can be used by farm animals and pets like dogs, horses, sheep, goats, etc. The pressure range it can safely work on is 1 to 50 psi. With the help of lag and U-bolts, this device can be easily fixed at any desired height but these bolts will have to be purchased separately. With ½ MIP threads used on the float, the attachment can be towards the right or left.
Floats are not frost proof and may break when frozen. The product dimensions are 11 inches x 5 inches x10 inches. The weight is 3.1 pounds and is ranked as the 12th best horse watering product. The waterer got 4.3 stars out of 5 and among pet products this device got ranked at 34,129 on Amazon.
- Easy to clean
- Small unit size prevents animals from making it dirty
- May leak at adapter side
- Suggested additional parts may not work well
- Plastic pipes wear out faster
4. Behlen Country AHW80 Horse Waterer – Best for Easy Setup
- Styrofoam base keeps the frost line far from the waterer
- Urethane adds 4 folds more insulation than others even at -20 degree Fahrenheit
- Prevents stray voltage by double insulation
- Accessible doors, detachable drain plugs, hold-downs attached to the device
- Price: Check Price
The product is rust and corrosion-proof. The product comes with a heating pad using Infrared radiation and works at 100 watts power, located under the trough. The heat pad starts at 42 Fahrenheit temperature. To keep animals safe the heat pad is placed far from animal reach. Has an animal capacity of 80.
The product weight is 38.6 pounds and the size is 28 x 18 x 30 inches. The product is rated 3.9 out of 5, is ranked as the 86th best horse watering product, and is ranked 189,310 among pet products on Amazon.
- One unit provides enough water for efficient watering
- Pre-made ready to use
- 3 to 4 horses can use at once
- Hard to clean
- Heater not very efficient at very low temperatures
- Heater hard to replace
5. Brower MK32E Super Insulated Electric Heated Horse Waterer – Best for Heating the Water
- 18 inches tall
- Insulation makes it heating cost-efficient
- Insulation has an R-value of 7.14 per inch
- Water-resistant insulation and trough depth of 4.5 inches
- Insulation repels rodents
- Price: Check Price
This product is a double drink waterer. The waterer can cater to around 40 ponies, 25 horses, 100 calves, and 40 small wild animals. To keep animals safe, sidewalls with a heavy gauge and rounded steel troughs are present. The product has galvanized steel jackets and troughs. Easy to use plugs help inconvenient water drainage.
Polyurethane foam is fixed tightly around the trough and jacket. No chlorofluorocarbons or formaldehyde is used. A low porosity strong material, ABS is used for the rugged valve which is very durable. The machine has a dimension of 23.75 x 13 x 21.25 inches and weighs 45 pounds. It got a rating of 3.5 out of 5 and was ranked 119 among animal waterers on Amazon.
- Convenient supply of clean water to animals
- Serves a good amount of animals
- Plastic pipes get worn out easily
- The valve may leak in some cases
- Screws too long for the float
Below are some features which should be given special consideration while shopping for automatic waterers:
The right bowl size is important so that animals can easily drink from the waterer. For farm animals, the size should be larger than for small pets. Thus keeping in mind the animals available you should select the bowl size. For outdoor animals a size of 11.81 x 7.87 x 3.94 inches to 28 x 18 x 30 inches is common.
The water bowl should be at a height that makes it easy for animals to drink water. In some waterers around 18 inches of height is given. This makes it hard for animals to create a mess while drinking and they can easily drink from the waterer.
Material: Plastic vs. Metal
It depends on which part serves which function. For pipes, plastic is a bad option as they warn out in very cold and warm seasons and are easy to leak. For bowls with certain coatings nylon can be used. For rust and corrosion protection stainless steel is a very good option.
Heated vs. Unheated
An unheated waterer would require manual heating in winters which is a hassle. Heated waterers are thus better but should be of good quality and safe for animals.
The waterer should be easy to clean thus if materials are rust-free and waterers have a good drainage system then cleaning is convenient.
Rounded EdgesIf edges are not polished or rounded then animals and people working on it can get hurt thus it is a good safety feature to have round or polished edges.
Additional installation gearMany waterers require a lot of additional elements to be made functional. These include certain screws, pipes, bolts, and hoses. Many don’t even have heating thus additional heating steps are needed. Some waterers are not rust proof thus some parts require frequent replacement. Some waterers have certain parts which are very sensitive and thus without careful handling they may break and require buying new ones. Thus before you buy a waterer make sure to consult a plumber as you may need a lot of parts that you are not expecting.
Frequently Asked Questions
What is the best automatic horse waterer?
It depends on the region, price, and the animals you have. Certain waterers are good at certain things so it depends on your specific needs. The Automatic 304 stainless steel waterer bowl for livestock is easy to clean and is very durable. The OMIN 2 Automatic heated cattle waterer is a very good heated cattle waterer. The Automatic stainless stock waterer for farm animals is long-lasting and durable.
How do I get my horse to drink from an automatic waterer?
Using treats like apples you can attract animals towards the waterer.
How does an automatic waterer work?
In an automatic waterer, two major processes are happening. The refilling and the heating process. The refilling process works by adjusting water levels when needed. When an animal arrives to drink the water afloat and valve work together and raise the water so the animal can drink it. When the water has reached a certain level the water stops rising further. This is similar to a toilet. The water is usually supplied by a tank. The size of a tank depends on how much water is needed. About the heating, there are special components which automatically heat water and prevent water from freezing in very cold weather.
How do you clean an automatic horse waterer?
Using a hose and drainage mechanism can help in keeping the waterer clean. If placed at a good height and having ample space messy drinking sessions by animals can be avoided. Many use fishes for preventing algae growth and certain materials also help in keeping the trough clean for a long time.
How do you install an automatic horse waterer?
Certain waterers come with different instructions and many are per-assembled. Using pipes and hoses the waterer can be given access to water, can release water and certain bolts are used to mount the waterer. Effective grounding is crucial for animal safety and requires special consideration.
ConclusionIn this product review, we took you through 5 automatic cattle waterers, described their key features, their pros, and cons. Some are easy to install, some are hard to fix and many have leak issues. Some are well planned with round and polished edges and some are well insulated. Some are easy to clean, some are very long-lasting and some have huge animal capacities. It all comes to what you prefer.
The installation varies from product to product and working is similar in most cases. Durability is another point to consider. If it’s brittle it will break, gets scratches, and even causes electrocution due to leaks. Thus a leak-proof system is important to save cost and water. The sound of the machine is another factor if it’s too noisy then animals might not ever use it. Thus to make them familiar to the device certain treats are used and constant practice is recommended.
Animal waterers come in all shapes and sizes. Considering animal safety, the availability of fresh and clean water is most important while you select an animal waterer. There are tons of options out there from which you can select the best for you and with careful research and some experimentation, it is promising to find the best one.